LINEAR WAY SERIES
VMC A750
Features
- • 750/460/540 mm on X-Y-Z travel
- • 10HP spindle output
- • 3-axes motor extreme output performance
- • 36M/min. rapid feed rate
- • Belt-Driven spindle , no counter-weight equipped
- • Super Strong on column & machine base design
Product Detail
The structural design adopts a stable base and saddle-shaped columns to ensure that the whole machine always maintains precision and operates with high efficiency, greatly reducing machine vibration.
The entire A750 casting was analyzed through wired components. Its structural strength is comparable to mid-sized machine sizes of other brands of machines, providing high mechanical rigidity requirements.
The three axes of VMC A750 are equipped with powerful roller linear slides and precision ball screws to reduce noise and improve the smoothness of the transmission system, achieving the best dynamic accuracy in rapid displacement. The machine has an efficient tool changing device and an advanced cam transmission mechanism to select tools at any position.
Specifications
| MODEL : VMC A750 | |||
|---|---|---|---|
| WORKING TABLE | |||
| Working table szie | mm | 800 x 460 | |
| T - slots | mm | 18 x 3 x 125 | |
| Max. table load | kgs | 500 | |
| TRAVEL | |||
| X axis travel | mm | 750 | |
| Y axis travel | mm | 460 | |
| Z axis travel | mm | 540 | |
| Spindle nose to table surface | mm | 120 - 660 | |
| SPINDLE | |||
| Transmission | Belt - Drive (STD) ; Direct - Drive (OPT) | ||
| Spindle taper | BT - 40 | ||
| Spindle speed | rpm | 10000 | |
| Spindle motor | kw | 5.5 / 7.5 | |
| FEED | |||
| X-Y-Z motor output (Fanuc) | kw | 1.8 / 1.8 / 3 | |
| X-Y-Z motor output (Mitsubishi) | kw | 2.2 / 2.2 / 3 | |
| X-Y-Z rapid travel | M/min. | 36 / 36 / 30 | |
| X-Y-Z cutting feed rate | M/min. | 10 | |
| ATC SYSTEM | |||
| ATC type | Arm type (STD) | ||
| Magazine capacity | nos. | 24 | |
| Max. tool diameter | Φ(mm) | 80 | |
| Max. tool length | mm | 200 | |
| Max. tool weight | kgs | 7 | |
| RAIL TYPE | |||
| A series: 3 axes linear guideways | |||
| DIMENSION & OTHERS | |||
| Power comsumption | KVA | 15 | |
| Air pressure required | kg/cm² | 6 - 8 | |
| Floor occupation (LxWxH) | cm | 260 x 230 x 255 | |
| Machine weights | kgs | 4300 | |
All Specifications&Design Are Subject To Change Without Prior
Option
- 1. Rigid tapping
- 2. RS-232 interface
- 3. Auto power off
- 4. 3-axes auto lubrication
- 5. Alarm indicator
- 6. Cooling device
- 7. Spindle air blast
- 8. Heat exchanger
- 9. Working lamp
- 10. Coil conveyor (L/R)
- 11. Remote hand wheel
- 12. Full guarding enclosure
- 13. Telescopic cover on 3-axes
- 14. LED light (inside m/c)
- 15. Operation & maintenance manual
- 16. Tool kits & foot pad screws